7
INTRODUCTION TO YOUR
NEW EMULSIFIER-MIXER
Blixer
®
5
g • Blixer
®
5 V.V. g
Blixer
®
7 • Blixer
®
7 V.V.
ROBOT COUPE has developed a new concept in
appliances: the Blixer®.
The Blixer® combines the features of two well-known
appliances: the cutter and the blender-mixer.
The Blixer® is perfectly geared to professional
needs. It can perform a number of tasks that you
will soon discover as you use it.
The Blixer® will make it easy to prepare mixed
liquid or semi-liquid, raw or cooked meals.
The Blixer® replaces the blender which has never
been entirely satisfactory because it cannot process
solid foods.
Thanks to its simple design, all components
requiring frequent handling for maintenance or
cleaning can be fitted and removed quickly.
To make things easier for you, this manual gives a
breakdown of all the various assembly operations.
This manual contains important information
designed to help the user get the most out of the
emulsifier-mixer Blixer®.
We therefore recommend that you read it
carefully before using your machine.
SWITCHING ON
THE MACHINE
• ADVICE ON ELECTRICAL CONNECTION
Before plugging in, make sure your power supply
corresponds to that indicated on the machine’s
serial number plate.
WARNING
This appliance must be plugged into an
grounded socket (risk of electrocution).
• Blixer® 5 • Blixer® 7 Three phase
ROBOT-COUPE appliances are fitted with the
following types of motor:
208 - 240 V / 60 Hz / 3
This machine is supplied with a cable to which you
simply attach the appropriate electrical plug or
isolator for your system. The cable has four wires,
one earth wire, plus three phases wires.
If you have a 4-pin plug:
1) Connect the green and yellow earth wire to the
earth pin.
2) Connect the three other wires to the remaining
pins.
If you have more than 4 pins in the plug, please
note the ROBOT-COUPE does not require a neutral
wire.
Switch on the empty machine, making sure that
the blade is rotating properly in an anti-clockwise
direction.
On the lid a arrow marks the blade rotation
directions.
If the blade turns in a clockwise direction, swap
over two wires.
GREEN YELLOW is the earth,
DO NOT DISCONNECT
Swap either : the
➊ and the ➋
the
➋ and the ➌
the
➊ and the ➌
• Blixer® 5 V.V. • Blixer® 7 V.V. Single phase
The models are equipped with a variable speed
motorization comprising an AC Induction Motor, a
Variable Speed Drive and according to the supply
voltage a Voltage Doubler or not.
By default the machines come with a power supply
cord which plugs into a standard NEMA 5-20P 120
Volt, 60 Hz, 1 phase, 20 Amp grounded power
outlet.
- ENERGY SAVING MODE FOR
Blixer® 5 - Blixer® 5 V.V.
Blixer® 7 - Blixer® 7 V.V.
After the food processor is plugged in, it needs to be
switched on by pressing the "ON" button I.
If the processor is not used for 5 minutes, it will go
into energy saving mode.
The "ON" button needs to be pressed again to switch
on the power supply.
• CONTROL PANEL
Red switch = "OFF" switch
Green switch I = Start speed 1
Black switch = Pulse control
Blixer® 5 - Blixer® 7 :
Green switch II = Start speed 2
Blixer® 5 V.V. - Blixer® 7 V.V. :
Potentiometer: Variable speed: 300 - 3,500 rpm.
To Next Page
Loading...
