ROBOT3T- 3C MACHINERY CO., LTD
6/4, 328 Cao Lo Street, Ward 4, District 8, Hochiminh City, Vietnam
Email: sales@robot3t.com
(+84) 97-490-8615
USER MANUAL THC3T-02 UP/DOWN Page 10 | 21
standard equipped with a low voltage output of 1:50 divider. This ratio is the
most commonly used division in most major brands and there will most likely be
a plug for this connection on the outside of the cutter's unit.
2.3 Potentiometer
To set height from torch to material by the potentiometer. (U mode on LEDs display)
Fig8. Plasma cutter with voltage divider 1:50 output
To Next Page
Loading...
