EasyManua.ls Logo

Robstep M2 - 3. Remote Controller Information; Key Function Summary

Default Icon
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ā—† When is under the normal mode or the beginner mode, the transporter body will be powered off automatically and keepRostep M2
connected with the remote controller after idling for more than 10 minutes; if the transporter body is under the sleep mode (R ostep
M2 is under the idle status for more than 18 hours or the keys and of the remote controller are pressed), the remote controller
will be powered off automatically.
NOTE
!
3.6 List of Key Functions
Transporter body is started
Press: To enter the assistant mode under the non-riding
status
Press: No effect under person-riding status
Press: To honk the horn
Hold down: To mute/unmute
Press: To turn on/off the headlamp
Transporter body is
powered off
Press: To power off the transporter body under non-riding status,
and no effect under person-riding status. Hold down: To power
off the remote controller
Press: To start the transporter body and enter the
beginner mode
Press: No effect
Hold down: To
mute/unmute
Press: To start the transporter body and
enter the normal mode
Press: No effect
Hold down: To power
off the remote controller
etomeR fo syeK
rellortnoC
7