Need help?Do you have a question about the ROCAM NC360 and is the answer not in the manual?
Step-by-step instructions for connecting the camera via Ethernet and power.
Guide to downloading the ROCAM app, connecting to the network, and adding the camera.
Steps to connect the camera to a WiFi network using the mobile application.
Instructions for adjusting video quality and frame rate (FPS) for the camera.
Enabling push notifications for motion detection and saving alarm videos.
General| Connectivity | Wi-Fi |
|---|---|
| Night Vision | Up to 10m |
| Audio | Built-in microphone |
| Wireless | 2.4 GHz Wi-Fi (IEEE802.11b/g/n) |
| Protocols | TCP/IP, HTTP, RTSP |
| Power Supply | 5V DC |
| Operating Temperature | -10°C to 50°C |
| Storage | MicroSD card |
| Motion Detection | Yes |
To Next Page