Audio Parameter Setting
2. Tap or to access the monitor setting menu.
3. Choose ‘Audio’ . You can configure Microphone, Audio Jack and Speaker.
4. Tap ‘Microphone’ and adjust ‘Input Volume’ . Then you can configure sensitivity of microphone.
The larger value, The higher sensitivity.
Adjust ‘Output Volume’ . Then you can configure the Volume of speaker. The larger value. The larger sound.
1. Open the application.
Audio
SD Card Setting
2. Tap or to access the monitor setting menu.
3. Tap ‘SD Card’ . You can save video on SD Card and configure setting.
4. Enable Camera will save video on SD Card and enable loop recording.
1. Open the application.
5. Tap to input the value of Video Length.
The larger value, The longer video length.
SD Card
Video Length(Minute) 10
5. Tap ‘Audio Jack’ and adjust ‘Input Volume’ . Then you can configure the volume of microphone.
The larger value, The higher volume.
Adjust ‘Output Volume’ . Then you can configure the Volume of audio jack. The larger value. The larger sound.
You can plug speaker or headset into the audio jack.
Cyclic Recording
4. Enable Camera will format SD Card.
Format SD Card
Note. ALL THE DATA WILL BE LOST AFTER FORMAT.
07
To Next Page
Loading...