19
5
Wireless Communication, Meter Pairing, and Data Transfer
Overview
The process of creating a connection
between the meter and the mobile device
is called pairing. You will need an
application on your mobile device that can
accept the meter’s data. You can use this
application to wirelessly and automatically
synchronise your diabetes information
between the meter and the mobile device.
Pairing
The meter can only pair with 1 device at a
time. Pairing with a second device
overwrites the first pairing.
The meter and the device to be paired
should be within 1 metre of each other.
On Your Mobile Device
Ensure Bluetooth is on and open the
diabetes management app.
On Your Meter
With the meter o,
press and hold
and
at the same time
until
appears. Both
and appear and
flash on the display.
6-digit PIN
Locate the 6-digit PIN on the back of
your meter.
On Your Mobile Device
Within the app, follow the instructions
and select your meter. When prompted,
enter the meter’s 6-digit PIN.
The meter times out after 30 seconds
once you are prompted to enter the PIN.
81383_09241493001_09241493001_01.indd 1981383_09241493001_09241493001_01.indd 19 10/13/2020 2:44:48 PM10/13/2020 2:44:48 PM
To Next Page
Loading...
Need help?
General
