20
Wireless Communication, Meter Pairing, and Data Transfer
5
On Your Meter
or
OK appears if pairing is successful. Err
appears if pairing is unsuccessful.
NOTE
The meter has time and date auto-sync
capability when paired with a mobile
device that will update the meter time
and date automatically. Even if you use
your meter in multiple time zones,
results are stored from newest to
oldest and not by time and date.
Transferring Data Wirelessly
If the meter is paired with a mobile device
and Bluetooth is on, your test results will
be automatically sent to the paired device.
Turning Bluetooth O
Turn Bluetooth o to disable wireless
communication (flight mode). Turning
Bluetooth o will not unpair your meter.
or
mmol/L
With the meter off, press
or
. The
last stored test result appears on the
display.
or
mmol/L
Press and hold until the Bluetooth
symbol disappears.
Turning Bluetooth On
If you have turned Bluetooth o (flight
mode), follow the steps below to turn it
back on. This will enable wireless
communication with your mobile device.
or
mmol/L
With the meter o, press
or
. The
last stored test result appears on the
display.
81383_09241493001_09241493001_01.indd 2081383_09241493001_09241493001_01.indd 20 10/13/2020 2:44:52 PM10/13/2020 2:44:52 PM
To Next Page
Loading...
Need help?
General
