21
Wireless Communication, Meter Pairing, and Data Transfer
5
or
mmol/L
Press and hold until the Bluetooth
symbol appears.
Transferring Data Using a USB
Cable
This feature allows you to transfer data
from your meter to special software for
diabetes management on a PC using a
USB cable.
Plug the small end of
the USB cable into the
meter.
2
Plug the large end of
the USB cable into a
USB port on the PC.
If the meter is o, it
turns on.
Start the diabetes management
software on the PC and initiate a data
transfer.
The meter transfers
the data to the
software.
NOTE
The USB cable does not charge the
meter batteries. Remove the USB cable
after you have finished.
81383_09241493001_09241493001_01.indd 2181383_09241493001_09241493001_01.indd 21 10/13/2020 2:44:54 PM10/13/2020 2:44:54 PM
To Next Page
Loading...
Need help?
General
