Roche ACCU-Chek Guide Me User Manual

8
Your New System
1
Setting the Time and Date
1
Press and release
to turn the meter
on.
The flashing test
strip symbol
appears on the
display.
2
set-up
Press and hold
until set-up
appears on the
display. The hour
flashes.
Press
or to
decrease or increase the hour.
3
set-up
Press to set the
hour and move to
the next field.
4
Repeat steps 2 and
3 to adjust each
field. Press and
hold
until the
flashing test strip
symbol appears.
Insert a test strip to perform a test.
NOTE
• The meter prompts you to set the
time and date the first time you turn
the meter on or if an error occurs.
• Press and hold
at any time until
the flashing test strip symbol
appears to perform a test.
• The time and date on the meter
synchronises to the time and date on
the paired device each time the
meter sends data to the paired
device. See the chapter Wireless
Communication, Meter Pairing, and
Data Transfer.
81383_09241493001_09241493001_01.indd 881383_09241493001_09241493001_01.indd 8 10/13/2020 2:44:23 PM10/13/2020 2:44:23 PM

Roche ACCU-Chek Guide Me Specifications

General

Brand	Roche
Model	ACCU-Chek Guide Me
Category	Blood Glucose Meter
Language	English