Roche cobas c 513 - Page 19

Roche Diagnostics
cobas c 513 analyzer · Software Version 02-05 · Safety Manual · 6.0
19Safety precautions
Electromagnetic compatibility The cobas c 513 analyzer complies with the standard
IEC 61326-2-6/EN 61326-2-6. It has been designed and
tested to CISPR 11 Class A. In a domestic environment it
may cause radio interference, in which case, you may
need to take measures to mitigate the interference.
The electromagnetic environment should be evaluated
prior to operation of the device.
• Do not operate this system in close proximity to
sources of strong electromagnetic fields (for example,
unshielded intentional radio frequency sources), as
they may interfere with proper operations.
• Do not operate the following devices in close
proximity to the system:
- Mobile phones
- Transceiver
- Cordless phones
- Other electrical devices that generate strong
electromagnetic fields.
The RFID reader in the cobas c 513 analyzer complies
with the emission requirements described in this part of
the FCC CFR 47, Part 15 Class A.
System not used for an extended period r Follow the extended shutdown procedure in the user
documentation.
r Set the main circuit breaker switches to OFF if you do
not use the system for an extended period.
r Remove and refrigerate any remaining reagents and
controls.
r For further information, contact your Roche Service
representative.
Damage in transit r Do not attempt to relocate or transport the system.
r Leave relocation and transportation to Roche Service
representatives.