EasyManua.ls Logo

Rocket Espresso RE A2 - User Manual

Rocket Espresso RE A2
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
_____________________________________________________________________________________________
© Rocket Espresso Ltd. RE series User Manual Ed. 07.2015. Specifications subject to change without notice.. Page 1
User Instructions Rocket RE A and RE S
Espresso Machines
RE A: 2 – 3 – 4 brewing heads
RE S: 2 – 3 – 4 brewing heads
From serial # C1507…..
Question and Answer IconNeed help?

Do you have a question about the Rocket Espresso RE A2 and is the answer not in the manual?

Rocket Espresso RE A2 Specifications

General IconGeneral
BrandRocket Espresso
ModelRE A2
CategoryCoffee Maker
LanguageEnglish

Summary

Brewing Espresso (Automatic Portion Control)

RE A: Preparing ONE cup of espresso

Step-by-step guide for brewing a single espresso.

RE A: Preparing TWO cups of espresso

Step-by-step guide for brewing two espressos.

Brewing Espresso (Semi-Automatic Portion Control)

RE S: Preparing ONE cup of espresso

Step-by-step guide for brewing a single espresso.

RE S: Preparing TWO cups of espresso

Step-by-step guide for brewing two espressos.

Dispensing Steam to Froth or Heat Liquids

Steaming Milk Example

Detailed process for steaming milk and achieving desired foam.

Proper Care and Maintenance

Cleaning After Each Use

Routine maintenance tasks to perform immediately after using the machine.

Daily Cleaning Tasks

Recommended cleaning for group head screens throughout the day.

Machine Shutdown Procedures (Machine On)

Back flushing Brew Groups

Step-by-step guide for backflushing brew groups.

Cleaning Filter Holders and Baskets

Instructions for cleaning filter holders and their baskets.

Machine Shutdown Procedures (Machine Off)

Cleaning Group Components

Cleaning showers, gaskets, and group flange with a brush.

RE A Series: Portion Setting

Setting Automatic Coffee Portions

Guide to program automatic coffee portions for RE A series.

Technician Programming Mode Entry

How to Enter Programming Mode

Steps to access the technician programming mode.

Setting Language Parameter

How to select the display language in programming mode.

Setting Name Parameter

How to set the machine's name or identifier.

Related product manuals