_____________________________________________________________________________________________
© Rocket Espresso Ltd. RE series User Manual Ed. 07.2015. Specifications subject to change without notice.. Page 12
Start up
We assume the machine has been properly installed.
Open the water tap and switch on the main electrical switch (not included to delivery).
Turn the on/off switch (Fig. 1 or Fig. 1B – Pos. 1) from position 0 to position 1.
Wait till the boiler pressure has reached the working pressure (0.9 bar approx). You
can check it on the gauge (Fig. 1 or Fig. 1B – Pos. 8).
Open the steam handle (Fig. 1 or Fig. 1B – Pos. 3) for some seconds and then close it.
This operation avoids milk resuction into the boiler. Wait till the working pressure has
been reached again .
Your machine is now ready to work.
Operation of Rocket Espresso RE A series (automatic portion control)
Fig. 2 Touchpad
A B C D E F