_____________________________________________________________________________________________
Subject to change without notice. 15
We assume the machine is properly installed
To use the machine with the direct water connection to the
hydraulic circuit instead of the water reservoir refer to page 33.
Before starting using the machine, please control the following:
1. Lever (7) is completely down.
2. Steam handle (2) is closed.
3. Hot water handle (4) is closed.
4. On/off switch (12) is on position “0” =machine switched off
5. Machine is unplugged.
6. Drip tray (10) and its grid are properly positioned into the machine.
To Next Page
Loading...
