EasyManua.ls Logo

Rocket R9 - Machine Startup Procedure; Initial Power-On Steps; Operation: Brewing Espresso; Touchpad Controls Overview (Fig. 2)

Rocket R9
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
______________________________________________________________________________________________________________________________________________
© Rocket Espresso Ltd. R9 series. User Manual Ed. 02.2016. Specifications subject to change without notice. Page 11
Start up
We assume the machine has been properly installed.
Open the water tap and switch on the main electrical switch (not included to delivery).
Turn the on/off switch (Fig. 1 – pos. 1) from position 0 to position 1.
Wait until the boiler pressure gauge (fig. 1-pos.8) reads the working pressure (app. 0.9 bar) and group
display reads app. 103°C.
Open the steam handle (Fig. 1 - pos. 3) for some seconds and then close it. This operation avoids milk
resuction into the boiler. Wait until the working pressure has been reached again .
Your machine is now ready to work.
OPERATION
Fig. 2 Touchpad
A B C D
Brewing espresso (with automatic portion control)
Preparing ONE cup of espresso
1. Use one cup filter handle (with 1 spout)
2. Position the metal one cup filter basket firmly inside the filter handle
3. Pour one portion (app. 6, 5-7 g) of ground espresso coffee into the filter basket
4. Tamp the ground coffee gently using the tamper supplied with the machine

Related product manuals