Rocket RE DOPPIA Series - Disassembly and Dismantling

_____________________________________________________________________________________________
© Rocket Milano s.r.l. - RE DOPPIA series. User Manual Ed. 01.2019. Specifications subject to change without notice. Page 17
Wipe down surface of machine with non-abrasive clean cloth. Do never use aggressive
cleaners or scouring powders! This operation must be done when necessary.
DISASSEMBLING / DISMANTLING OF THE MACHINE
The machine must be disassembled and dismantled by an authorized technician
according to local law and jurisdiction.
1. Clean filter holders, baskets and brewing head (“group”).
2. Switch off and let machine cool down to ambient temperature.
3. Remove the drip tray (Fig. 1 - 9)
4. Open the boiler drain valve (located under the drip tray). The boiler water will
flow into the machine’s drain tray.
5. When done, close the boiler drain valve.
6. Position the drip tray (Fig. 1 - 9).
7. Store the machine in a safe, dry and clean place.