13
RF-WHP212
Connecting the AC adapter to the docking station
Cautions:
To avoid risk of fire and to prevent damage, only use the AC
adapter supplied with your wireless headphones. Make sure
that the AC power outlet matches the AC adapter’s 100-240V
before making the connection.
Plug the AC adapter into the power outlet only after all other
connections are completed.
To connect the AC adapter to your docking station:
1 Connect the AC adapter connector to the docking station’s
DC 5V jack.
2 Connect the AC adapter plug to an AC power outlet.
3 Turn the Power switch on the back of the docking station to
“ON.” The PAIRING indicator begins to blink rapidly (blue).
Using your system
Charging the headphones
Important: Before using the wireless headphones for the first
time, make sure that the batteries are fully charged for at least
four hours. This will provide a longer operating lifetime for the
batteries.
To charge the headphones:
• Place the headphones onto the docking station. Make sure
that the headphone charging contacts and the docking
station charging pins make contact.
• The docking station CHARGING indicator turns red to
indicate the headphones are charging.
RF-WHP212_12-0593_MAN_V3.fm Page 13 Thursday, May 31, 2012 7:40 AM
To Next Page
Loading...
