16
3 Put your headphones on your head. Adjust the fit until you
feel comfortable.
4 Turn on your audio source and begin playback. Depending
on the audio source, you may need to turn up the volume on
the audio source.
5 Adjust the headphone volume to your normal listening
level.
Caution: Continuous use at high volume may permanently
damage your hearing.
Notes: If the system is connected to a TV, you may want to turn
off the TV sound to prevent hearing sound from the TV
speakers. Refer to your TV manual.
Turning off the system
To turn off the system:
1 Slide the POWER switch located on the headphones’ left
earpiece toward the arrow to turn off the headphones.
2 Slide the ON/OFF switch on the docking station to OFF to
turn off the system.
Note: It’s important to turn the headphones off when not in use
to conserve the battery, or if you prefer you can leave them on
as long as they are placed in the docking station.
Maintaining your system
Use a soft cloth dampened with a weak solution of mild
detergent and water. Dry the device immediately afterwards
with a clean cloth. Do not use abrasive cloth, thinners, alcohol,
or other chemical solvents, because they may damage the
finish or remove the panel lettering.
RF-WHP212_12-0593_MAN_V3.fm Page 16 Thursday, May 31, 2012 7:40 AM
To Next Page
Loading...
Need help?
General
