11RF-RBWS01
Wireless speaker — front
4
# Feature Description
1
Standby indicator Turns red when the wireless speaker is in standby mode.
2
Power/Join indicator The indicator will light solid blue when the speaker is joined to a Rocketboost hub device,
if it is not joined, it will flash slowly. When the speaker is put in joining mode, the
indicator will flash rapidly.
3
Power on/
Standby/Join
Press to turn the wireless speaker on. Press and hold to initiate joining. Press again to go
to standby mode. When you connect the AC power adapter, the device turns on
automatically.
4
Source button Press to select different audio streams on your Rocketboost network. Each press moves to
the next source.
5
Source indicator Turns blue when receiving audio from a Rocketboost wireless sender. Blinks slowly if the
current source listened to is muted.
Note: This indicator will not be lit if the Rocketboost wireless sender is turned off. Press
the SOURCE button to find the next available source.
6
Volume control knob Turn this knob to increase or decrease the volume.
7
BASS button Press to enable/disable BASS enhancement.
8
Remote control sensor Receives the signal from the remote control.
IR
BASS
V
O
L
U
M
E
standby
SOURCE
1
2
3
4
5
7
86
RF-RBWSO1_11-0202_MAN_V1.fm Page 11 Monday, May 2, 2011 11:46 AM