17RF-RBWS01
- Connect the AC power adapter to an AC power outlet only after all other
connections are completed.
4
Select either USB-In or LINE-In using the remote control, depending on
which audio input you are using.
Setting up and using your remote control
To set up and use your remote control:
1 Remove the insulation sheet in the battery tray before using the remote
control for the first time.
2 Aim the remote control at the IR sensor on the front from a maximum
distance of 23 ft. (7 m) away and a maximum angle of +/- 30 degrees
from the center line.
The remote control can be used with both the wireless sender/receiver
and the wireless speaker, depending on the remote control function
being used.
USB
In
LINE
In
RF-RBWSO1_11-0202_MAN_V1.fm Page 17 Monday, May 2, 2011 11:46 AM
To Next Page
Loading...
Need help?
General
