Need help?Do you have a question about the Rockford Fosgate Punch PM300X1 and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| Frequency Response | 20 Hz - 250 Hz |
| Total Harmonic Distortion (THD) | < 1% |
| Signal-to-Noise Ratio | > 90 dB |
| Fuse Rating | 30 A |
| Speaker Level Inputs | Yes |
| Power Output (RMS) | 300 Watts |
| Input Sensitivity | 150 mV - 4 V |
| Crossover | Low-pass: 50Hz - 250Hz, 12dB/octave |
Guidelines for safe listening to prevent hearing loss from high sound pressure levels.
Important safety warnings and precautions for operating and installing the unit.
Explains the function and color indication of the Power and Protect LEDs.
Describes the output clip indicator and its role in audio setup.
Details the function of the input level control for matching audio sources.
Notes the location of centering indicators on the amplifier.
Describes the nickel-plated, captive c-clamp speaker terminals.
Explains the RCA inputs and their pass-thru functionality.
Explains the selectable switch for High-Pass, All Pass, or Low-Pass modes.
Details the built-in 12dB/octave Butterworth filter.
Describes the Gyrator-based Punch EQ for frequency adjustment.
Explains the fixed 28Hz 12dB/octave filter for subwoofers.
Describes the function of the optional remote Punch Level Controller.
Details the switch for 2-channel or 4-channel input modes.
Describes the power, ground, and remote terminals for wiring.
Vehicle considerations and tools needed for amplifier installation.
Guidance on optimal amplifier mounting for cooling and performance.
Discusses the impact of amplifiers on the vehicle's electrical system.
Step-by-step instructions for wiring the amplifier correctly.
Step-by-step guide to setting up the input clip indicator.
Guide to adjusting the output clip indicator for optimal audio.
How to adjust the crossover frequency for different audio channels.
Explanation of the 2/4 channel switch for input modes.
Details the subwoofer input switch on the PM1000X5.
How to connect signals using high-level (speaker) input.
Information on using pass-thru RCA connections for multiple amplifiers.
Explains the infrasonic filter to limit low frequencies for subwoofers.
Describes the Punch EQ for boosting bass, mid-bass, and treble.
Information on using the optional remote punch level control.
Verifying power light status and checking fuses and connections.
Troubleshooting steps when the Protect light indicates a short or impedance issue.
Steps to diagnose issues with audio output from the amplifier.
How to resolve popping sounds when turning the amplifier on/off.
Steps to eliminate engine noise interference in the audio system.
Troubleshooting steps for when the remote function is not working.
Diagnosing issues with the remote control lights.
Details the different warranty periods for Rockford Fosgate products.
Specifies what is covered under the Rockford Fosgate warranty.
Defines the scope of who is covered by the warranty.
Lists exclusions from the warranty coverage.
Instructions on how to get service or return a product.
To Next Page