EasyManuals Logo

Rockville RCS650-6 User Manual

Rockville RCS650-6
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
Thank you for purchasing this Rockville product. Please read this installation guide carefully
for proper use of your Rockville RCS650-6 Rack-Mountable Commercial Amplier/Receiver.
Should you need assistance please call our technical help line at 1-646-758-0144, Monday
through Thursday, 9am to 10pm EST, and Fridays, 9am to 3pm EST.
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF ELECTRICAL SHOCK, NEVER OPEN THE UNIT. NO
USER-SERVICEABLE PARTS INSIDE. WE RECOMMEND TAKING THE UNIT TO A
QUALIFIED SERVICE TECHNICIAN FOR ANY REPAIRS.
• Do not expose this unit to any kind of moisture.
• Please ensure that the unit is situated in a properly ventilated area.
• Do not attempt to operate this unit if the power cord has been frayed or broken.
• Do not attempt to break off or remove the ground prong. This prong is used to reduce
the risk of electrical shock and re in case of an internal short.
• Do not operate this unit if it is damaged.
• This unit is intended for indoor use only.
• During long periods of nonuse, disconnect the unit from the power source.
• Always mount this unit in a safe and stable manner.
• Power supply cords should be routed so that they are not likely to be walked on or
pinched by items placed on or against them, paying particular attention to the point
of exit from the unit.
• To avoid unnecessary wear and to improve the unit’s life span, unplug the unit when not
in use for extended periods of time.
through Thursday, 9am to 10pm EST, and Fridays, 9am to 3pm EST.
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF ELECTRICAL SHOCK, NEVER OPEN THE UNIT. NO
USER-SERVICEABLE PARTS INSIDE. WE RECOMMEND TAKING THE UNIT TO A
QUALIFIED SERVICE TECHNICIAN FOR ANY REPAIRS.
• Do not attempt to operate this unit if the power cord has been frayed or broken.
• Do not attempt to break off or remove the ground prong. This prong is used to reduce
• Power supply cords should be routed so that they are not likely to be walked on or
pinched by items placed on or against them, paying particular attention to the point

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rockville RCS650-6 and is the answer not in the manual?

Rockville RCS650-6 Specifications

General IconGeneral
Power Output650 Watts
Frequency Response10 Hz - 40 kHz
Signal to Noise Ratio> 100 dB
Dimensions19" x 11" x 3.5"
Peak Power650 Watts
InputsRCA
OutputsSpeaker terminals
Minimum Speaker Impedance2 Ohms
Low Pass Crossover50Hz - 250Hz
Impedance4 Ohms
Input Impedance10k Ohms
Power Supply12V
Input Sensitivity0.2V - 6V
Bass Boost0-18dB
Operating Voltage12V

Related product manuals