Fiber-optic Kits
Fiber-optic card is not required. It can be used for
communication between a PowerFlex DC drive and field
controller. For more information on fiber-optic cards, see
publication 20P-IN078
, PowerFlex DC Fiber-optic Interface
Option Module Installation Instructions.
Overvoltage Protection Devices
When the PowerFlex DC Field Controller is used to supply a very
inductive load like a motor/generator field or an electromagnet,
an overvoltage protection device (voltage clamp) and
dampening resistor must be installed on the field controller
load. See the PowerFlex DC Field Controller Voltage Clamp
Installation Instructions, publication 23PFC-IN002
, for details.
These tables identify the voltage clamp and dampening resistor
kits.
Communication Option Kits
Description Cat. No.
BACnet MS/TP RS-485 communication adapter 20-COMM-B
ControlNet communication adapter (coaxial) 20-COMM-C
DeviceNet communication adapter 20-COMM-D
EtherNet/IP™ communication adapter 20-COMM-E
Dual-port EtherNet/IP™ communication adapter 20-COMM-ER
HVAC communication adapter 20-COMM-H
Modbus/TCP communication adapter 20-COMM-M
PROFIBUS DP communication adapter 20-COMM-P
ControlNet communication adapter (fiber) 20-COMM-Q
RS-485 DF1 communication adapter 20-COMM-S
External communications kit power supply 20-XCOMM-AC-PS1
External DPI communications kit 20-XCOMM-DC-BASE
External DPI I/O option board
(1)
(1) For use only with external DPI communications kits 20-XCOMM-DC-BASE.
20-XCOMM-IO-OPT1
USB converter
(2)
(2) Includes 2 m USB, 20-HIM-H10, and 22-HIM-H10 cables.
1203-USB
Personal Computer Programming Software
Description Cat. No.
Connected Components Workbench™ (CCW) software
(1)
(1) Download available for free at rok.auto.ccw.
DriveTools™ SP software
(2)
(2) Available to order through the ‘How to Buy’ link at http://
ab.rockwellautomation.com/Drives/Software/9303-DriveTools-SP#overview.
Studio 5000® environment
(3)
(3) For more information on the Studio 5000 environment, see https://
www.rockwellautomation.com/en-us/products/software/factorytalk/designsuite/
studio-5000/studio-5000-logix-designer.html.
Description Cat. No.
Fiber-optic card 20P-S5H781
Fiber-optic cable kit
• 3 m (9.8 ft)
•5 m (16.4 ft)
SK-20P-2950
SK-20P-29501
Voltage Clamp Kits
Field Controller Specifications
AC Input Voltage
Output Amp
Rating
Frame Size
Voltage Clamp
Cat. No.
200 17…120 A 23P-FCOVPD-B-FA
200 245…570 B 23P-FCOVPD-B-FB
500 17…120 A 23P-FCOVPD-D-FA
500 245…570 B 23P-FCOVPD-D-FB
Dampening Resistor (RB) Kit Selection
Field Controller
AC Input Voltage
Range (Vrms)
RB Resistor
Value Ohms
RB Resistor Size
Watts
RB Resistor Kit
Cat. No.
(1)
(1) Resistor kits are IP00 / Open Type and must be installed in an enclosure.
60…100V 220 930 23P-FC-RB100
101…200V 390 930 23P-FC-RB200
201…300V 680 930 23P-FC-RB300
301…400V 1000 930 23P-FC-RB400
401…500V 1200 930 23P-FC-RB500
To Next Page
Loading...
Need help?
General
