62 Rockwell Automation Publication 750-RM100A-EN-P - August 2019
Chapter 7 DeviceLogix
Download and Enable the
Logic
1. When the code is completed, click in the task bar to verify the logic.
After the verification, a window appears with the result.
The message-log window displays any errors.
2. If there are no errors, click in the taskbar to exit edit mode.
3. To download the logic, click in the taskbar.
A confirmation window opens.
4. Click Yes.
5. To enable the logic, click in the taskbar.
The logic is executed in the drive.
To disable the logic, click in the taskbar.
See DeviceLogix Technology for Industrial Applications Application
Techniques, publication 193-AT001
, for more information.
To Next Page
Loading...
Need help?
General
