Need help?Do you have a question about the Rockwell Automation Allen-Bradley PowerFlex Series and is the answer not in the manual?
General| Series | PowerFlex |
|---|---|
| Category | Controller |
| Manufacturer | Rockwell Automation |
| Brand | Allen-Bradley |
| Product Line | Allen-Bradley |
| Type | Variable Frequency Drive (VFD) |
| Voltage Rating | Varies by model (e.g., 120V, 240V, 480V, 600V) |
| Current Rating | Varies by model |
| Power Rating | Varies depending on specific model |
| Control Method | Volts/Hertz (V/Hz) |
| Communication Protocols | EtherNet/IP, DeviceNet, ControlNet |
| Enclosure Type | NEMA/UL Type 1, NEMA/UL Type 12, NEMA/UL Type 4/4X |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | Varies depending on specific model |
| Humidity | 5% to 95% (non-condensing) |
| Certifications | UL, CE, cUL, RoHS |
Preliminary steps and requirements before starting the chapter.
Lists the essential hardware and software for the chapter.
Provides a visual flowchart of the procedures to follow.
Details the physical and software connection setup.
Steps to establish communication with the drive.
Instructions for drive configuration using specific software.
Prerequisites, required items, and system architecture review.
Outlines the sequence of actions for system validation.
Details the default serial port settings for communication.
Sets up communication parameters for the HMI terminal.
Physical connection of devices and program download to the controller.
Setting IP addresses and transferring HMI application to the terminal.
Confirming system functionality via machine screens and operation.
Details drive status indicators and command features.
Confirms manual start, stop, and direction control of the drive.
Tests the functionality of the fault display and help system.
Describes a user-defined function block for drive communication.
Lists global variables for user program interfacing.
To Next Page
