To Next PageTo Next PageWhat to do if process value is not able to reach first peak in time on Rockwell Automation Allen-Bradley Micro870 Controller?
If the process value isn't reaching the first peak in time with your Rockwell Automation Controller, try to increase ATDynamSet.
What to do if process value is not able to reach second peak on Rockwell Automation Allen-Bradley Micro870 Controller?
If the process value is not able to reach the second peak on your Rockwell Automation Controller, you can increase the Deviation or increase the Step.
General| Series | Micro800 |
|---|---|
| Controller Type | Programmable Logic Controller (PLC) |
| Input Voltage | 24V DC |
| Programming Software | Connected Components Workbench (CCW) |
| Communication Ports | Ethernet, Serial |
| Memory | Varies by model |
| Operating Temperature | 0°C to 60°C |
| Programming Language | Ladder Logic, Function Block Diagram, Structured Text |
| Analog Inputs | Up to 8 |
| Analog Outputs | Up to 4 |
| High-Speed Counter | Varies by model |
| Pulse Output | Varies by model |
Consolidates warnings, attentions, and hazards for safe operation and handling.
Provides guidelines for wiring, including spacing, routing, and labeling, to ensure proper installation and minimize noise.
Details how to configure serial and Ethernet channels for DNP3 Slave communication.
Explains PTO/PWM support and motion axis capabilities on Micro830, Micro850, and Micro870 controllers.
Restricts access to programming software connections by requiring a password for upload and download.
Details how to back up and restore projects using the microSD card and Connected Components Workbench software.
Guides users on flashing firmware using Connected Components Workbench software version 10 or later.
Explains how to set, change, and clear controller passwords using Connected Components Workbench software.
Lists possible error codes for controllers and recommended recovery actions, referencing the fault log.
Outlines a model to diagnose and troubleshoot software and hardware problems, with recommended pages for help.
Provides steps for performing autotuning for first and second-order systems, including parameter recommendations.
