Rockwell Automation Allen-Bradley 2080-L50E - User Manual

Quick Start
Micro800 Controllers Starter Pack
Controller Catalog Numbers 2080-LC10, 2080-LC20, 2080-L50E
Starter Pack Catalog Numbers 2080-LC10-STARTERPACK,
2080-LC20-STARTERPACK, 2080-LC20-STARTERPACKL,
2080-LC50-STARTERPACK, 2080-LC50-STARTERPACKL
Original Instructions

Rockwell Automation Allen-Bradley 2080-L50E Specifications

General

Brand	Rockwell Automation
Model	Allen-Bradley 2080-L50E
Category	Controller
Language	English

Summary

Important User Information

Safety Definitions and Symbols

Defines safety labels like WARNING, ATTENTION, IMPORTANT, SHOCK, BURN, and ARC FLASH hazards.

Chapter 3 Create and Save a Connected Components Workbench Project

Create a Connected Components Workbench Project

Chapter 4 Build and Download Project

Build and Download the Project to your Micro800 Controller

Describes the process of building and downloading a project to a Micro800 controller.

Connection Browser and Download Confirmation

Chapter 6 Monitor Your Micro800 Controller Program

Monitor Program in Connected Components Workbench

Explains how to view program execution and changes in real-time within the CCW software.

View Real-time Changes in List Format

Chapter 7 How to Create Variables

Create Local Variables for your Program

Step-by-step guide to creating local variables for use within a program in CCW software.

Chapter 8 How to Implement an Instruction Block

Add a TON Instruction Block

Details on how to implement a Timer-on-Delay (TON) instruction block in a motor circuit.

Enter Parameters for TON Instruction Block

Guide to configuring the parameters for the TON instruction block in CCW software.

Add an ANY_TO_TIME Instruction Block

Instructions on implementing an ANY_TO_TIME data conversion block to convert integer to time.

Chapter 9 How to Add a Plug-in Module

Add a Plug-in Module to the Micro800 Controller

Step-by-step process for adding an analog input plug-in module to the Micro800 controller chassis.

Chapter 10 Learn About User-defined Functions and User-defined Function Blocks

Create a UDF for your Program

Guide on creating a User-Defined Function (UDF) to convert raw data to engineering units in CCW.

Add the UDF to your Program

Chapter 11 Import and Export Project

Exporting and Importing Projects

Chapter 13 PanelView 800 Graphic Terminal Design in Connected Components Workbench Software

Add a PanelView 800 Terminal to Your Project

Guide on adding a PanelView 800 terminal device to an existing CCW project.

Configure Your PanelView 800 Terminal Communication Settings

Steps to configure communication settings, like orientation and IP address, for the PanelView 800 terminal.

Chapter 14 Using HMI Tags

Create Global Variables for HMI Tags

Instructions on creating global variables to be used as HMI tags for the PanelView 800 terminal.

Edit Ladder Diagram Program for HMI Control

Chapter 15 Configure Micro800 Controller Ethernet Settings

Setting the IP Address for Micro800 Controller

Details on configuring the IP address and Ethernet settings for the Micro800 controller for PanelView communication.

Chapter 16 HMI Tag Editor

Import Tags using HMI Tag Editor

Steps for importing tags from the Micro800 controller to the PanelView 800 terminal using the HMI Tag Editor.

Chapter 17 HMI Screen

Create a Screen for Your PanelView 800 Application

Guide on creating and naming a screen for the PanelView 800 application, setting it as the startup screen.

Create Objects for Your Screen

Chapter 18 Configure PanelView 800 Terminal Ethernet Settings

Setting Static IP Address for PanelView 800

Steps to configure the PanelView 800 terminal's Ethernet settings, including static IP address and mask.

Chapter 19 Download HMI Application

Save and Download Project to PanelView 800

Instructions on saving the project and downloading the HMI application to the PanelView 800 terminal.

Chapter 20 Test the HMI Application

Run the HMI Application

Steps to run the downloaded HMI application on the PanelView 800 terminal.

Test the Analog Scaling and Seal-in Circuit