Rockwell Automation Publication 2080-QS004C-EN-E - October 2023 55
Chapter 10 Learn About User-defined Functions and User-defined Function Blocks
Import Sample Code into Your Project
1. For this example, select the UDFB located under Local Folder > CCW > Samples > Rockwell Automation > UDFBs > Blink.
2. Double-click the RA_BLINK folder to see the contents.
The contents inside are the import exchange file in 7z/zip format and a Word document to describe the operation of the UDFB.
3. Right-click the Micro800 controller and select Import > Import Exchange File.
4. Select Browse to locate the directory for the selected UDFB RA_BLINK.
To Next Page
Loading...
