Need help?Do you have a question about the Rockwell Automation PowerFlex 753 and is the answer not in the manual?
General| Input Voltage | 380-480V AC |
|---|---|
| Output Voltage | 0-480V AC |
| Output Current | 1.5-490 A |
| Control Method | Sensorless Vector |
| Communication Options | EtherNet/IP, DeviceNet, ControlNet |
| Enclosure Type | IP20 |
| I/O | Digital Inputs/Outputs, Analog Inputs/Outputs |
| Safety | Safe Torque Off (STO) |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5...95% noncondensing |
| Altitude | Up to 1000 m |
| Dimensions | Varies based on model |
| Weight | Varies based on model |
Describes the standard operating modes (Operator, Program, etc.) for the instruction.
Details the information and functions available on the Operator faceplate tab.
Provides a comprehensive list of possible drive fault conditions.
Details various status indicators reflecting the drive's current operation.
To Next Page
