Rockwell Automation ARMORSTART

PROGRAMMING MANUAL
ARMORSTART
®
ETHERNET/IP™
COMMUNICATIONS &
CONTROL
BULLETINS 280E AND 284E

Rockwell Automation ARMORSTART Specifications

General

Overload Protection	Electronic Overload Protection
Product Type	Motor Controller/Starter
Input Voltage	24V DC
Output Type	AC
Communication Protocols	EtherNet/IP, DeviceNet
Protection Rating	IP67
I/O Options	Analog I/O
Enclosure Material	Metal

Summary

Chapter 2 Connect and Configure ArmorStart with Add-On-Profile (AOP)

Offline Connection

Describes how to establish an offline connection using the Add-On-Profile (AOP) for configuration.

General Tab

Details the General tab settings for naming the module and inputting its IP address.

Connection Tab

Parameters Tab

Covers viewing and modifying device parameters using the Parameters tab in the AOP.

Internet Protocol Tab

Chapter 3 ArmorStart Internal Web Server

How to Access the ArmorStart EthernetIP Internal Web Server

Web Server Functionality

Parameters

Instructions on viewing and modifying ArmorStart parameters through the web server interface.

Diagnostics

Setting Up the Device Password

Chapter 4 ArmorStart Bulletin 280 E: Full Voltage Starter

Chapter 5 ArmorStart Bulletin 284 E: Variable Frequency Starter

Control via RSLogix 5000 Ladder Logic

Explains how to control the ArmorStart Bulletin 284E using RSLogix 5000 ladder logic.

Configuring the ArmorStart using the Parameter List in RSLogix 5000

Details on configuring the Bulletin 284E using its parameter list within RSLogix 5000.

HandOffAuto (HOA) Control

Diagnostics and Faults

Covers identifying, interpreting, and clearing faults for the Bulletin 284E.