Need help?Do you have a question about the Rockwell Automation PowerFlex 755 and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Altitude | Up to 1000 m (3280 ft) without derating |
| Input Voltage | 380-480V AC |
| Output Voltage | 0-480V AC |
| Control Method | Vector Control, V/Hz Control |
| Communication Options | EtherNet/IP, ControlNet, DeviceNet |
| Enclosure Type | NEMA 1, NEMA 12 |
| Cooling Method | Fan Cooled |
| I/O | Digital Inputs, Digital Outputs, Analog Inputs, Analog Outputs |
| Safety | Safe Torque Off (STO) |
| Protection Features | Overvoltage, Undervoltage, Overcurrent, Overtemperature |
| Ambient Temperature | 0 to 40 °C (32 to 104 °F) |
| Storage Temperature | -40…70 °C (-40…158 °F) |
| Relative Humidity | 5 to 95% non-condensing |
Provides critical safety and usage guidelines for the documentation.
Preparation steps, including lab overview, tools, and network setup.
Hands-on exercises for configuring the PowerFlex 525 drive using HIM and software.
Hands-on exercises for configuring the PowerFlex 755 drive using HIM and software.
Explores integrated drive profiles and the Motion Accelerator Toolkit.
Demonstrates automatic configuration setup for PowerFlex drives.
To Next Page