Rockwell Automation 1768-L43 User Manual

1768 CompactLogix System
Catalog Numbers 1768-L43 and 1768-L45 CompactLogix Controllers
Quick Start

Rockwell Automation 1768-L43 Specifications

General

Brand	Rockwell Automation
Model	1768-L43
Category	Controller
Language	English

Summary

Important User Information

Safety Warnings

Details various safety warnings including potential hazards.

How Hardware Is Connected

EtherNet/IP Network Connection

DeviceNet Network Connection

Chapter 1: Prepare the CompactLogix Hardware

Chapter 2: Prepare the Computer and Load Controller Firmware

Chapter 3: Prepare the Distributed POINT I/O Hardware

Chapter 4: Prepare the PowerFlex 70 Drive

Chapter 5: Prepare the PanelView Plus Terminal

Chapter 6: Prepare the Kinetix 6000 Multi-axis Servo Drive System

Chapter 7: Configure the EtherNet/IP Network

Chapter 8: Configure the DeviceNet Network

Introduction

Before You Begin

Checks hardware installation, computer preparation, and device connection.

What You Need

Requires RSNetWorx for DeviceNet software.

Follow These Steps

Guides on applying power, setting node address, and creating configuration file.

Chapter 9: Create a Project in RSLogix 5000 Programming Software

Introduction

Before You Begin

What You Need

Follow These Steps

Details steps for creating a project, configuring modules, and adding logic.

Chapter 10: Add Distributed Point I/O Modules to the Project

Chapter 11: Create a PowerFlex 70 Application

Chapter 12: Create a PanelView Plus Application

Chapter 13: Create a Kinetix 6000 Application

Before You Begin

What You Need

Follow These Steps

Details enabling time master, creating motion group, and configuring axes.