Rockwell Automation 1768-L43 - Transfer the Application to the Panelview Plus Terminal

Publication IASIMP-QS003B-EN-P - October 2009 179
Create a PanelView Plus Application Chapter 12
Transfer the Application to the PanelView Plus Terminal
1. Select
Application>Create
Runtime Application.
2. In Save as type, select the
Runtime versions that
matches your PanelView
Plus firmware.
To check the PanelView
Plus firmware revision,
on the terminal, select
Terminal Settings
[F4]>System
Information>About
FactoryTalk ME>Station.
3. Click Save to accept the
default file name.
4. Under Tools, select
Transfer Utility.