92 Publication IASIMP-QS003B-EN-P - October 2009
Chapter 7 Configure the EtherNet/IP Network
Additional Resources
Resource Description
EtherNet/IP Modules in Logix 5000 Control
Systems User Manual, publication ENET-UM001
Provides details on how to configure and use EtherNet/IP modules in Logix 5000
systems including how to assign IP addresses to devices and browse the EtherNet/IP
network in RSLinx software.
(1)
(1)
If you are connecting to the AB_ETHIP driver using a VPN connection with a firewall, refer to the Knowledgebase tech note E47839422.
Tech Note # E47839422 available at:
http://rockwellautomation.com/knowledgebase
Provides a description of the common Comms error dialog box and its solution.
To Next Page
Loading...
