Rockwell Automation 1768-L43 - Edit the Drive Parameters

Publication IASIMP-QS003B-EN-P - October 2009 143
Create a PowerFlex 70 Application Chapter 11
Edit the Drive Parameters
Required for EtherNet/IP System
1. Double-click the
Parameter List.
2. Enter the following
parameters:
3. Click OK.
The parameters are
loaded to the drive.
Parameter Name Value
Parameter 61 Autotune Ready
Parameter 90 Speed Ref A Sel DPI Port 5
Parameter 361 Digital In1 Sel Not Used
Parameter 362 Digital In2 Sel Not Used
Parameter 363 Digital In3 Sel Not Used
Parameter 364 Digital In4 Sel Not Used
Parameter 365 Digital In5 Sel Not Used
Parameter 366 Digital In6 Sel Not Used