86 Publication IASIMP-QS003B-EN-P - October 2009
Chapter 6 Prepare the Kinetix 6000 Multi-axis Servo Drive System
Additional Resources
Resource Description
Kinetix Motion Control Selection Guide,
publication GMC-SG001
Provides details on motor and drive performance specifications.
Kinetix 6000 Multi-Axis Servo Drive Installation
Manual, publication 2094-IN001
Provides details on panel layout, and how to install and wire Kinetix 6000 drives and
components.
Kinetix 6000 Multi-Axis Servo Drive User
Manual, publication 2094-UM001
Provides details on how to integrate your Kinetix 6000 system with a CompactLogix
2094-M04SE SERCOS module, including how to start up, configure, and troubleshoot
the system.
Line Interface Module installation Instructions,
publication 2094-IN005
Provides details on how to install, wire, and troubleshoot the line interface module.
System Design for Control of Electrical Noise,
publication GMC-RM001
Provides best practices on how to minimize noise in control panel while complying with
noise regulations.
Kinetix Accelerator Toolkit Quick Start,
publication IASIMP-QS002
Provides complete details and tools to help you quickly integrate a Kinetix Motion
system into your ControlLogix system.
Logix5000 Motion Modules User Manual,
publication LOGIX-UM002
Provides details on how to setup and configure motion control using your 1768 SERCOS
module.
System Design for Control of Electrical Noise
Video, publication GMC-SP004
Contact your local distributor for details on how obtain publication.
Kinetix Accelerator Toolkit CD, IASIMP-SP004
Contact your local distributor for details on how to obtain CD. See appendix B for more
information.
To Next Page
Loading...
