Need help?Do you have a question about the Rockwell Automation Reliance electric 6SP401-011 and is the answer not in the manual?
General| Brand | Rockwell Automation |
|---|---|
| Model | Reliance electric 6SP401-011 |
| Category | DC Drives |
| Language | English |
Provides an overview of analog/digital I/O, control modes, reference selection, protection, and advanced features.
Provides instructions on attaching the drive to a vertical surface using mounting holes.
Covers power wire sizing, using input/output contactors, and branch circuit protection.
Details how to select upstream branch circuit protection, including fuses and circuit breakers.
Explains connecting the drive Safety Ground - PE terminal to system ground and grounding impedance requirements.
Provides instructions for connecting AC output power wiring from the drive to the motor.
Describes incoming line components like transformers, reactors, and protection, and their installation.
Covers requirements for providing an external, hardwired emergency stop circuit.
Describes methods for obtaining the drive speed reference, including auto and manual sources.
Provides a checklist for performing a final check of the installation before applying power.
Details steps to verify correct installation and apply power to the drive.
Guides on viewing, adjusting parameters, loading/saving user sets, and customizing display settings.
Explains monitoring drive status, referencing, and controlling operations like start, stop, and jog.
Lists prerequisites for start-up, including qualifications, OIM familiarity, hardware installation, and motor connection.
Outlines steps to safely discharge DC bus capacitors before touching internal components.
Lists drive faults, their types (auto-resettable, non-resettable, user-configurable), and corrective actions.
Provides a guide for common drive issues like not starting or incorrect operation.
To Next Page