MC16 Operating Manual 09.01.2020
Parameter Keypad Shortcut – enables to select key which will correspond to the zone when interactive
options are applied.
Text box Description – enables to enter custom description for the zone.
Parameter Parent – enables to select Alarm Zone which will be used in hierarchy as superordinate zone.
Parameter Auto-arming Schedule – enables assignment of schedule to specify when Alarm Zone is
automatically armed. It requires earlier defining of General Purpose Momentary type Schedule.
Parameter Quick Disarming – enables automatic disarming when access is granted.
Option Disable physical access when zone armed – when the option is enabled then Access Points of
armed Alarm Zone deny access till zone disarming.
Area Auto-arming Options
Parameter Incoming Auto-arming Signalling Time [min] – specifies how many minutes before planned
arming the warning is generated on Arming Points by means of LED STATUS (orange) indicators and by
means of input function [87] or [100].
Parameter Auto-arming delay when zone not ready for arming [min] – specifies how much the auto-
arming is delayed when input function [105] is triggered in the moment of planned arming.
Parameter Auto-arming delay on manual request [min] – specifies how much the auto-arming is delayed
when during auto-arming warning the input function [106] is used.
Option Postpone auto-arming after physical access is granted – when the option is enabled then auto-
arming can be delayed not only by function [106] but also by access granting at Arming Point.
Area Alarm Functions
Parameters in this area are mainly dedicated to intruder alarm functionality in RACS 5 system with MC16-
IAC controller(s).
Parameter Alarm Time [s] – specifies alarm signalling time triggered by input function [220] or [221].
Parameter Time Between Alarms [min] – specifies minimal time between successive intruder alarms.
Parameter Entry Delay [s] – specifies delay in detection of alarm from input lines with functions [221].
Parameter Alarm Limit – specifies maximal number of alarms for intruder detection.
Parameter Intruder Detection Limit – specifies maximal number of activations of input lines with functions
[220] and [221].
Tab Arming Points
The tab is available when an Alarm Zone is created and it enables to select which Access Points will
function as Arming Points of the zone.
Tab Inputs
The tab is available when an Alarm Zone is created and it enables to assign Input(s) to the zone. Input
parameters and functions are listed within the description of Input objects.
Tab Outputs
The tab is available when an Alarm Zone is created and it enables to assign Output(s) to the zone. Output
parameters and functions are listed within the description of Output objects.
Tab Function Keys
The tab is available when an Alarm Zone is created and it enables to assign Function Key(s) to the zone.
Function key parameters and functions are listed within the description of Function Key objects.
Tab Local Commands
The tab is available when an Alarm Zone is created and it enables to assign Local Commands to the zone.
Local Command parameters and functions are listed within the description of Local Command objects.
Displays
Display is a logical object representing physical display of peripheral device (e.g. MCT88M-IO display)
connected to MC16 controller. Such display can present not only its internal data but also messages from
MC16 controller. More information on displays is given in AN011 application note.
To Next Page
Loading...
