To Next PageTo Next Page
Need help?Do you have a question about the Roger PR612 and is the answer not in the manual?
Details wiring terminals and provides a connection diagram for the access controllers.
Explains the function and color of the three LED indicators on the controllers.
Specifies the required 12VDC nominal power supply and connection guidelines.
Provides guidance on connecting inductive door locking devices and using a protective diode.
Details RS485 bus and UT communication interfaces for connecting controllers.
Explains communication with peripheral devices using RACS CLK/DTA standard.
Covers configuration of inputs (NO/NC) and outputs (relay, transistor) for controller functions.
Illustrates physical dimensions and mounting procedures for PR612 controller.
Offers essential advice for device installation, addressing, and electrical connections.
Explains controller addressing methods (Fixed ID, software) for network systems.
Details procedures for simplified and full memory resets, including factory settings restoration.
Outlines controller configuration methods using PR Master software or keypad commands.
Describes the process for updating the controller's firmware using RogerISP software.
Details wiring terminals and provides a connection diagram for the access controllers.
Explains the function and color of the three LED indicators on the controllers.
Specifies the required 12VDC nominal power supply and connection guidelines.
Provides guidance on connecting inductive door locking devices and using a protective diode.
Details RS485 bus and UT communication interfaces for connecting controllers.
Explains communication with peripheral devices using RACS CLK/DTA standard.
Covers configuration of inputs (NO/NC) and outputs (relay, transistor) for controller functions.
Illustrates physical dimensions and mounting procedures for PR612 controller.
Offers essential advice for device installation, addressing, and electrical connections.
Explains controller addressing methods (Fixed ID, software) for network systems.
Details procedures for simplified and full memory resets, including factory settings restoration.
Outlines controller configuration methods using PR Master software or keypad commands.
Describes the process for updating the controller's firmware using RogerISP software.
General| Brand | Roger |
|---|---|
| Model | PR612 |
| Category | IP Access Controllers |
| Language | English |
