R&S FSH Digital Modulation Analyzer
Measurements on LTE Signals
Operating Manual 1173.6275.12 - 30 320
Customizing the color map
Alternatively, you can customize the color map and customize it for over-the-air
measurements and cable connected measurements separately.
► Press the "Display Settings" softkey.
► Select the "Over-The-Air Maximum…" or the "Over-The-Air-Minimum…" menu item
to define a color map for over-the-air measurements.
► Select the "Cable Connected Maximum…" or the "Cable Connected Minimum…"
menu item to define a color map for cable connected measurements.
In both cases, the "Minimum…" menu item defines the lower threshold of the color
map while the "Maximum…" menu item defines the upper threshold of the color
map. The threshold is the minimum or maximum signal level that is included in the
color map.
The application also allows you to select the color scheme.
► Press the "Display Settings" softkey.
► Select the "Color Table" menu item.
The R&S FSH opens a submenu.
► Select the color scheme you want.
To Next Page
Loading...
