The Quick Start Guide describes the following R&S
®
FSH models and options:
● R&S FSH4 (1309.6000.04)
● R&S FSH4 (1309.6000.14)
● R&S FSH4 (1309.6000.24)
● R&S FSH8 (1309.6000.08)
● R&S FSH8 (1309.6000.18)
● R&S FSH8 (1309.6000.28)
● R&S FSH13 (1314.2000.13)
● R&S FSH20 (1314.2000.20)
● R&S FSH4 (1309.6000.54, equivalent to 1309.6000.04)
● R&S FSH4 (1309.6000.64, equivalent to 1309.6000.14)
● R&S FSH4 (1309.6000.74, equivalent to 1309.6000.24)
● R&S FSH8 (1309.6000.58, equivalent to 1309.6000.08)
● R&S FSH8 (1309.6000.68, equivalent to 1309.6000.18)
● R&S FSH8 (1309.6000.78, equivalent to 1309.6000.28)
● R&S FSH13 (1314.2000.63, equivalent to 1314.2000.13)
● R&S FSH20 (1314.2000.70, equivalent to 1314.2000.20)
● R&S FSH-K41 (1304.5612.02)
● R&S FSH-K42 (1309.5629.02)
● R&S HA-Z2240 (1309.6700.02)
The contents of this manual correspond to firmware version 3.20 or higher.
© 2021 Rohde & Schwarz GmbH & Co. KG
Muehldorfstr. 15, 81671 Munich. Germany
Phone: +49 89 4129-0
E-mail: info@rohde-schwarz.com
Internet: http://www.rohde-schwarz.com
81671 Munich, Germany
Subject to change – Data without tolerance limits is not binding.
R&S
®
is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
The following abbreviations are used throughout this manual:
R&S
®
FSH4/8/13/20 are abbreviated as R&S FSH. R&S
®
FSH4View is abbreviated as R&S FSH4View.