R&S FSH Putting into Operation
Connectors on the R&S FSH
Quick Start Guide 1309.6269.12 - 09 23
1.4.4 Headphone Jack
The 3.5 mm connector for headphones is located on the top of the R&S FSH.
The internal impedance of the connector is approximately 10 Ohm.
1.4.5 AUX Input
The AUX input is located on the left side of the R&S FSH under a protective cap.
You can connect various accessories like the GPS receiver R&S HA-Z240 (order no.
1309.6700.02) to the AUX connector.
To Next Page
Loading...
