R&S FSH Power Meter
Using a Power Sensor
Operating Manual 1173.6275.12 - 30 134
If you are using one of the NRP power sensors you also need a passive USB adapter
(R&S NRP-Z4) to connect the power sensor to the R&S FSH.
For more information on the characteristics of the supported power sensors see
● the datasheet of the R&S FSH
● the website for R&S power sensors
http://www2.rohde-schwarz.com/en/products/test_and_measurement/power_volt_meter/NRPZ.html
To Next Page
Loading...
