Rohde & Schwarz FSH4 - Amplitude Parameters; Bandwidth Configuration; Sweep Configuration

R&S FSH Menu and Softkey Overview
Functions of the Power Meter
Operating Manual 1173.6275.12 - 30 340
10.4.3 Amplitude Parameters
The AMPT key contains functionality to configure level parameters.
10.4.4 Sweep Configuration
The SWEEP key opens a menu that contains functionality to configure the sweep.
Power Meter and Directional Power Meter
Pulse Power Measurements
10.4.5 Bandwidth Configuration
The BW key opens a menu that contains functionality to configure the bandwidth. This
is only available with Pulse Power Measurements.