R&S FSH Digital Modulation Analyzer
Measurements on TD-SCDMA Signals
Operating Manual 1173.6275.12 - 30 293
9.7.1 The Result Summary
The result summary shows various measurement results and hardware settings in
numerical form.
► Press the "Result Display" softkey.
► Select the "Result Summary" menu item.
The R&S FSH shows the numerical results in a table.
1 Current type of result display
2 Currently selected standard
3 General settings
4 Synchronization state and GPS information
- green font: synchronization OK
- red font: synchronization failed
5 Global results for a TD-SCDMA time slot
6 Power results for a TD-SCDMA time slot
7 TD-SCDMA softkey menu
9.7.1.1 General Settings
For more information see "General Settings of the Digital Modulation Analyzer" on
page 244.
In addition the application features some settings specific to the 3GPP standard.
Scrambling Code
Shows the scrambling code of the base station. The scrambling code is a number
between 0 and 127.
If you have selected automatic detection of the code, the R&S FSH shows the label
"Auto". Automatic detection is the default method to find the scrambling code.
For more information see "Specifying the Scrambling Code" on page 304.
To Next Page
Loading...
