R&S FSH Network Analyzer Mode
Vector Voltmeter (R&S FSH-K45)
Operating Manual 1173.6275.12 - 30 210
6.6.1 Calibrating Measurements
To get the best and most accurate results, you have to calibrate the measurement. The
reflection and transmission measurement of the vector voltmeter each have their own
calibration procedures. To successfully calibrate the test setup, you have to connect
one or more calibration standards at the reference plane.
The process of calibration including the selection of a calibration kit works like that for
scalar or vector measurement. For more information see "Calibrating Measurements"
on page 181.
To Next Page
Loading...
