R&S FSH Receiver Mode (R&S FSH-K43)
Configuring Measurements in Receiver Mode
Operating Manual 1173.6275.12 - 30 239
► Press the TRACE key.
► Press the "Detector" softkey.
► Select the detector you want to use.
For more information on detectors in general, see "Selecting the Detector" on page
112.
Selecting the trace mode and working with memory traces
For more information on trace modes and memory traces see "Selecting the Trace
Mode" and "Working with Memory Traces" on pages 111 and 115.
To Next Page
Loading...
