R&S FSH Digital Modulation Analyzer
General Settings of the Digital Modulation Analyzer
Operating Manual 1173.6275.12 - 30 248
► Press the TRACE key.
► Press the "Trace Mode" softkey.
The R&S FSH opens a submenu to select the trace mode.
► Select the trace mode you want to work with.
If you have selected the average trace mode ("Average: 10" menu item), the R&S FSH
opens an input field to set the number of sweeps the R&S FSH includes in the
averaging.
► Enter the number of sweeps to include in the averaging.
In continuous sweep mode, the R&S FSH now calculates the moving average over
the number of sweeps you have specified. In single sweep mode, it stops the
measurement after finishing the sweeps and averages the traces.
To Next Page
Loading...
