R&S FSH Operating the R&S FSH
Connecting the R&S FSH to a PC
Operating Manual 1173.6275.12 - 30 25
After you have matched the subnet mask, you can define the IP address. When both
devices are in the same subnet, the first three digits of the IP address are usually the
same ('192' in the example below).
► Identify the IP address of your PC, for example in the Microsoft Windows "TCP/IP
Properties".
► In the "Instrument Setup" dialog box, select the "IP Address" item.
► Press the ENTER key.
► Enter the IP address of the PC with the numeric keys.
► Confirm the entry with the ENTER key.
Configuring the R&S FSH4View software
► Start R&S FSH4View.
► Select the "LAN" tab in the "Instrument Connect" dialog box.
To Next Page
Loading...
