Rohde & Schwarz R&S SMA100B - 5.1.12 Pulse Signal Connectors; 5.1.13 LF Modulation Connectors

Instrument Tour
R&S
®
SMA100B
35Getting Started 1419.8620.02 ─ 08
The PC 1.85 mm male connector for up to 67 GHz comes with a protective
1.85 mm female adapter to prevent the sensitive connector from damage.
It is available as a spare part, and can be replaced if damaged. Contact your
Rohde & Schwarz support center or www.customersupport.rohdesch-
warz.com for information.
How to: Chapter 4.9, "Connecting to RF", on page 21
5.1.12 Pulse Signal Connectors
Pulse Sync
Output signal for synchronizing the pulse generator signal. The synchronization
signal is generated at the beginning of each pulse. For double-pulse generation,
the synchronization signal is generated at the beginning of the first pulse.
Pulse Video
Output of the internal pulse generator signal or the looped through pulse signal
from Pulse Ext connector (video signal).
Pulse Ext
Input for an external pulse modulation signal or an external trigger/gate signal for
the pulse generator.
5.1.13 LF Modulation Connectors
LF
Output for internal LF generator signal.
See the data sheet and in the user manual, section "Analog Modulation".
Ext
Input for external analog modulation signals.
Front Panel Tour