Rohde & Schwarz R&S SMA100B - Taskbar

Instrument Control
R&S
®
SMA100B
54Getting Started 1419.8620.02 ─ 08
Tile Access to:
"Frequency"
●
RF frequency and phase
●
Reference frequency
"Level"
●
RF level
●
Attenuator
●
Automatic level control
●
User correction
"Clk Syn / Pow
Sens"
●
Clock synthesis
1)
●
Power sensors
1)
requires additional options
7.3.3 Taskbar
The "Taskbar" shows a home and an info button, and assigns a labeled button
whenever you open a dialog. If more dialogs are open than the taskbar can dis-
play, touch and swipe the taskbar to scroll up and down.
The buttons shown in the following example represent the variants.
Table 7-1: Example of buttons in the taskbar
"Home" button
Returns to the home screen.
"Busy" indicator
Indicates a running process.
"User Menu"
Lists parameters that can be defined for quick access.
Shows the current remote access connections when the instrument is
remotely controlled.
Tip: An indicator in the "System Config" tile shows the current remote con-
trol status.
R&S NRP power sensors
Shows a connected external power sensor. The button displays the current
readings when the sensor is active.
Understanding the Display Information